ToolShed MIG/ARC Welder 160 Amp Inverter

Code:
TSW16M
(0 reviews)
Check availability in store
WAS:
$749.00 Inc GST
NOW:
$699.00 Inc GST
Sale Ends 26/12/24

Description

ToolShed Inverter Portable MIG/ARC Welder

The ToolShed 160 Amp single phase DC Inverter MIG welder has been designed and manufactured for use within the industry and comes packed full of features.

The ToolShed MIG 160 welder is a great entry level MIG welding machine and is suitable for onsite welders, repair workshops, automotive workshops, farm workshops, etc. It offers the user a 160-amp DC gas/gasless MIG welder and a 130-amp DC Arc welder (lead included) all in one. Fitted with a high-quality wire feed system, this machine is very smooth and doesn't encounter the problems often found with cheaper wire feed units. It is also fitted with fine voltage/current controls which are extremely smooth to weld with. The output current goes as low as 30 amps which makes it ideal for small panel-steel work. Its polarity can also be reversed easily so that gas and gasless wire can be used. It can take 1-5kg spools of MIG wire. With the flick of a switch and attachment of the arc lead, this machine can be set up as a full DC arc welder. Offering a current range from 30-130 Amps, which is suitable for running electrodes from 2 - 3.2mm. It comes with a heavy-duty earth lead with dinse (quick change bayonet style) connectors, a 3m 150amp Binzel style Eurofit MIG torch, and consumables to get you started. Superior design lets you control all the modes of this machine within seconds. The rated duty cycle is 20% at 160 Amps. It is fan cooled with over temperature cut out to protect it. All of this is housed in a lightweight, package with a carry handle, weighing just 11Kg.

All ToolShed Inverter welding machines are manufactured with latest inverter technology they are far more efficient, reliable, faster and have higher current handling capabilities than transformer and other inverter systems.

Please find a simple guide for what this machine can be expected to weld in mild steel in MIG mode.
Welding current range Wire size Material Thickness
30 to 80A 0.6mm 0.5 to 1.5mm
40 to 140A 0.8mm 1 to 3mm
80 to 160A 0.9mm 1.5 to 5mm

Below is a simple guide for what this machine can be expected to weld in mild steel in the Arc welding mode
Welding current range Electrode Diameter Material Thickness
30 to 50A 2.0mm up to 1.5mm
50 to 90A 2.5mm up to 3mm
90 to 130A 3.2mm up to 5mm

Please note that this machine has been fitted with a 15 Amp plug to comply with NZ electrical regulations due to its high-power consumption. This machine will not plug into a standard 3 pin 10 Amp power outlet, please contact an electrician for advice before operation.

Specifications
Voltage - 240v
Frequency - 50/60Hz
Current Range - 30- 160Amp MIG, 30-130Amp Arc
Duty Cycle - 92A @ 60%
Lead lengths - 3m
Electrode Diameter - 2 - 3.2mm Arc Rods, 0.6-0.9mm MIG wire
Net Weight - 11Kg

Make an Enquiry
Add to Wishlist

Related Products

Begin typing your address and select the address from the list below