All Reviews for ToolShed Electric Nibbler 1.6mm

Back to Product
  • The ToolShed 05-03-2021

    Reply to Giles

    Hi Giles,
    Please rotate the head 90 degrees to cut corrugated iron. Then use the machine in a right to left motion rather than back to forward.
    Kind regards
    The ToolShed
  • Giles 03-03-2021

    Disappointing on corrugated iron

    I have used this to cut corrugated iron for my roof, but it's not great to use. When cutting straight across, it can't cut up the peaks of the corrugations properly. The back of the tool hits the iron and then you can't angle it up enough to go up the peak. I've tried adjusting the 'teeth', but the only way I can get it to work is to bend the actual roofing iron into a curve, so I can tilt the tool up enough. Not ideal. It cuts okay, if you're cutting on a diagonal. I'm sure it would be fine on flat metal.


  • John van Dinther 23-04-2020

    Hidden gem!

    I didn't realise just how beneficial this nobbler is over the previous ones I've used. Cutting little rectangles vs sharp crescents makes cleanup easy. I didn't realise just how much I hated those crescents. I've cut a lot of SS using a straight edge to break down 1.2mm sheets - clean straight cuts and the blade just keeps going. On SS that's saying something. Love it. (I know it's only rated for 1mm SS :-)
Begin typing your address and select the address from the list below