ToolShed Belt and Disc Sander 100mm x 150mm

Code:
TSS06
(2 reviews)
Check availability in store
NOW:
$299.00 Inc GST

Description

ToolShed 4" x 6" Belt & Disc Sander

The ToolShed Belt and Disc Sander is composed of a cast iron body which gives this sander a rigid base that doesn't move or twist. The 150mm sanding disc on the side of this machine is below the top of the sanding belt. This allows you to pass a larger workpiece over the top of it while you are using the belt. The sanding belt can be able to be used in a horizontal or vertical position. It is also fitted with a stop which can act as a rest to put smaller workpieces against. The ToolShed Belt and Disc Sander has a detachable table on the side, that can be adjusted between 0° and 45° which the ability to take a mitre guide. The table is easily attached to the side of the sander in front of the disc. This sander is also fitted with a dust extraction port to enable you to hook your dust extractor up to help keep the dust away from the motor and keep a clean work site.

Features
- Cast iron body
- Lower sanding disc on the side to prevent interference when sanding longer workpieces
- The sanding belt can be used in both a horizontal and vertical position
- Detachable table on the side
- Dust extractor port

Comes with a P80 sanding belt and disc.
Sanding belts and Discs are available online or instore at your local ToolShed.

Motor Size - 1/3rd hp
Belt Size - 100mm x 915 mm
Disc Size - 150mm - stick on.
Dimensions - 460mm x 410mm x 290mm h
Weight - 17.5kg

It is recommended a ToolShed dust extractor be used in conjunction with this machine.

Make an Enquiry
Add to Wishlist

Related Products

Begin typing your address and select the address from the list below